Product Name: Honeycomb ceramic rotary dehumidifier
Product Model: DHTC-120
Product Details
Honeycomb Ceramic Rotary Dehumidifier (also known as Rotary Dehumidifier Plastic Dehumidifier Honeycomb Dehumidifier Dongguan Rotary Dehumidifier)
What is a honeycomb type ceramic rotary dehumidifier a rotary dehumidifier a plastic dehumidifier a honeycomb type dehumidifier a Dongguan rotary dehumidifier?
Honeycomb type ceramic dehumidification Honeycomb type ceramic rotary wheel dehumidifier Rotary wheel dehumidifier Plastic dehumidifier Honeycomb type dehumidifier The rotary wheel of Dongguan rotary wheel dehumidifier uses ceramic fibers as the base material to form a honeycomb rotary wheel, and then uses a special chemical synthesis two-stage crystallization method to uniformly crystallize the moisture absorbent silica gel and molecular sieve onto the ceramic fiber rotary wheel, making it highly hygroscopic. The runner with this structure will not produce powder during operation, and its service life is greatly extended. The moist air separated by the honeycomb dehumidification wheel is thoroughly dehumidified and becomes ultra-low dew point dry air. Regeneration is also carried out under the same principle, only through the honeycomb dehumidification wheel (hygroscopic agent) in the opposite direction.
Under what circumstances are honeycomb ceramic rotary dehumidifiers used? Rotary dehumidifiers? Plastic dehumidifiers? Honeycomb dehumidifiers? Dongguan rotary dehumidifiers?
Poor molding of plastic products mostly results from poor dehumidification and drying. The American Plastics Association recommends that the plastic before molding must be dried to a moisture content of less than 0.002%, with poor transparency, runner adhesion, burrs, bubbles, scratches, flow marks, cracks, poor dimensional stability, internal stress generation, and insufficient physical strength of the product. Most of the undesirable reasons are due to insufficient dehumidification and drying of the plastic before molding. Especially, super absorbent plastics such as PET, PBT, PA, PC, etc. require ultra-low dew points
Dew point-40 (degree) drying equipment.
Honeycomb ceramic rotary dehumidifier Rotary dehumidifier Plastic dehumidifier Honeycomb dehumidifier Dongguan rotary dehumidifier Features:
1. LED interface display system and automatic fault display function are adopted
Imported dehumidification wheel with long service life
3. Suitable for ordinary and optical dehumidification and drying
4. Motor reverse phase and overload protection
5. It has overtemperature alarm and fault display functions
6. Simple internal structure, low failure rate, and convenient maintenance
Honeycomb ceramic rotary dehumidifier Rotary dehumidifier Plastic dehumidifier Honeycomb dehumidifier Dongguan rotary dehumidifier Working principle:
What is a honeycomb type ceramic rotary dehumidifier a rotary dehumidifier a plastic dehumidifier a honeycomb type dehumidifier a Dongguan rotary dehumidifier?
Honeycomb type ceramic dehumidification Honeycomb type ceramic rotary wheel dehumidifier Rotary wheel dehumidifier Plastic dehumidifier Honeycomb type dehumidifier The rotary wheel of Dongguan rotary wheel dehumidifier uses ceramic fibers as the base material to form a honeycomb rotary wheel, and then uses a special chemical synthesis two-stage crystallization method to uniformly crystallize the moisture absorbent silica gel and molecular sieve onto the ceramic fiber rotary wheel, making it highly hygroscopic. The runner with this structure will not produce powder during operation, and its service life is greatly extended. The moist air separated by the honeycomb dehumidification wheel is thoroughly dehumidified and becomes ultra-low dew point dry air. Regeneration is also carried out under the same principle, only through the honeycomb dehumidification wheel (hygroscopic agent) in the opposite direction.
Under what circumstances are honeycomb ceramic rotary dehumidifiers used? Rotary dehumidifiers? Plastic dehumidifiers? Honeycomb dehumidifiers? Dongguan rotary dehumidifiers?
Poor molding of plastic products mostly results from poor dehumidification and drying. The American Plastics Association recommends that the plastic before molding must be dried to a moisture content of less than 0.002%, with poor transparency, runner adhesion, burrs, bubbles, scratches, flow marks, cracks, poor dimensional stability, internal stress generation, and insufficient physical strength of the product. Most of the undesirable reasons are due to insufficient dehumidification and drying of the plastic before molding. Especially, super absorbent plastics such as PET, PBT, PA, PC, etc. require ultra-low dew points
Dew point-40 (degree) drying equipment.
Honeycomb ceramic rotary dehumidifier Rotary dehumidifier Plastic dehumidifier Honeycomb dehumidifier Dongguan rotary dehumidifier Features:
1. LED interface display system and automatic fault display function are adopted
Imported dehumidification wheel with long service life
3. Suitable for ordinary and optical dehumidification and drying
4. Motor reverse phase and overload protection
5. It has overtemperature alarm and fault display functions
6. Simple internal structure, low failure rate, and convenient maintenance
Honeycomb ceramic rotary dehumidifier Rotary dehumidifier Plastic dehumidifier Honeycomb dehumidifier Dongguan rotary dehumidifier Working principle:
Honeycomb type ceramic rotary dehumidifier Rotary dehumidifier Plastic dehumidifier Honeycomb type dehumidifier Dongguan rotary dehumidifier Specification table:
|
型号 |
风量 （m3/hr） |
再生电热 （kw) |
再生风机 (kw) |
干燥风机 (kw) |
外型尺寸(mm) W*D*H |
重量 (kg) |
|
DHTC-60(E) |
60 |
2.7 |
0.2 |
0.375 |
550*680*1150 |
130 |
|
DHTC -80(E) |
80 |
3.8 |
0.2 |
0.75 |
600*680*1200 |
130 |
|
DHTC -120(E) |
120 |
3.8 |
0.375 |
0.75 |
600*710*1380 |
230 |
|
DHTC -150(E) |
150 |
5.4 |
0.375 |
1.1 |
600*780*1480 |
315 |
|
DHTC -200(E) |
200 |
5.4 |
0.375 |
1.5 |
630*830*1450 |
355 |
|
DHTC -300(E) |
300 |
7.2 |
0.75 |
2.2 |
650*950*1550 |
100 |
|
DHTC -400(E) |
400 |
7.2 |
0.75 |
3.75 |
750*1050*1750 |
180 |
|
DHTC -500(E) |
500 |
10 |
1.9 |
3.75 |
750*1050*1750 |
510 |
|
DHTC -700(E) |
700 |
10 |
1.9 |
5.5 |
1100*1200*1900 |
550 |
|
DHTC -1000(E) |
1000 |
15 |
2.6 |
7.5 |
1100*1400*2250 |
600 |
Due to technological innovations, these figures only for reference, the Company shall be entitled to change without notice, all the models in order to prevail in kind.
13602318867
