Product Details
Features of dual machine integrated mold warming machine:
1) Dual computers independently control temperature, which is suitable for different temperature requirements of the front and rear molds. It can also accurately control two hosts with different temperatures at the same time, making operation convenient and applicable.
2) Compact structural design, small footprint, space saving, and complete functionality. It has the same safety protection and indication system as a single machine.
3) Adopt precise electronic controller, touch type storage, and simultaneously display the set temperature and real-time temperature, accurate and reliable.
4) Humanized design for appearance, convenient and fast operation, and more reasonable maintenance and disassembly.
5) The internal pipeline design is simple and smooth, with a compact structure, effectively reducing energy loss.
6) Electrical and heating devices are effectively separated, with good thermal insulation effect, avoiding damage to electrical appliances caused by high temperatures.
7) Six protection functions: thermocouple section couple alarm, power supply phase loss and out of phase protection, water pump overload protection, overheat protection, and oil and water shortage protection.
8) There are two types of models: oil type and water type. The standard operating temperature of the water type is 120 ℃, and the maximum operating temperature at high temperatures is 160 ℃; The oil temperature is 200 ℃.
Application case of dual machine integrated mold warming machine
The dual machine integrated mold temperature machine is generally suitable for occasions where different raw materials are used for dual color injection molding, and there are different requirements for mold temperature. Commonly used in number rings, toothbrushes, razors, electronic products, etc.
Technical Parameters of Daheda DHT Series Dual Machine Integrated Mold Thermostat
型号 MODEL |
DHTW2-6 |
DHTW2-9 |
DHTW2-12 |
DHTO2-6 |
DHTO2-9 |
DHTO2-12 |
DHTW2-6H |
DHTW2-9H |
DHTW2-12H |
传热介质
HEATING MEDIUM |
清水 WATER |
传热油HEAT-CTRANSFER OIL |
清水 WATER | ||||||
温度范围
TEMOERATURE RANGE |
30-120℃ |
30-200℃ |
30-160℃ | ||||||
冷却方式
COOLING MANNER |
直接冷却 DIRECT COODING |
间接冷却 INDIRECT COODING |
间接冷却 INDIRECT COODING | ||||||
模具出入口
MOLDIN/OUTLET |
3/8″X4 |
3/8″X4 |
1″x2 |
3/8″X4 |
3/8″X4 |
1″x2 |
3/8″X4 |
3/8″X4 |
1″x2 |
冷却出入口
WATERIN/OUTLET |
¢13 |
¢13 |
¢13 |
¢13 |
¢13 |
¢13 |
¢13 |
¢13 |
¢13 |
最高压力(kg/cm2)
MAXPRESSURE |
3.7 |
3.7 |
3.7 |
3.7 |
3.7 |
3.7 |
3.7 |
3.7 |
3.7 |
泵蒲PUMP POUER |
1/2HP*2 |
1HP*2 |
1HP*2 |
1/2HP*2 |
1HP*2 |
1HP*2 |
1/2HP*2 |
1HP*2 |
1HP*2 |
泵流量(L/MIN)
PUMP MAX HOW RATE |
40 |
60 |
60 |
40 |
60 |
60 |
140 |
180 |
180 |
加热量(KW
)HEATER |
6X2 |
9X2 |
12X2 |
6X2 |
9X2 |
12X2 |
6X2 |
9X2 |
12X2 |
容量(L)
TARK CAPACITY |
6X2 |
7X2 |
10.5X2 |
9X2 |
13X2 |
15X2 |
6X2 |
7X2 |
10.5X2 |
外型尺寸(LXWXH)
DIMENSIONS |
585x600
X690 |
585x600
X690 |
585x600
X700 |
585x600
X690 |
585x600
X690 |
585x600
X700 |
585x600
X690 |
585x600
X690 |
585x600
X700 |
重量(KG)
APPROX WEIGHT |
98 |
100 |
105 |
105 |
108 |
113 |
105 |
108 |
120 |
Due to technological innovations, these figures only for reference, the Company shall be entitled to change without notice, all the models in order to prevail in kind.