Roller mold heaters, roller heaters, roller temperature controllers, roller oil heaters are customized according to different customer requirements. The manufacturer directly sells roller oil heaters, water heaters, roller heaters, roller temperature controllers, roller oil heaters, roller oil heaters, roller heaters, roller water heaters, roller oil heaters, and other products.
Roller oil heater and roller temperature controller improve the molding efficiency of products, inhibit product defects, and reduce the occurrence of defective products. Pipeline explosion-proof device, imported microcomputer dual group PID temperature controller, set value and actual value displayed respectively, temperature control accuracy ± 1 degree. Customized according to customer requirements, automatic exhaust function at startup, computer touch control, automatic calculation, and multi-point temperature control unit can be customized. Imported advanced components, long service life, built-in safety protection, low noise, power saving and durability, suitable for use in different temperature control locations.
Features of roller heater, roller temperature controller, and roller mold temperature controller:
1. Pipeline explosion-proof device.
2. Blow air and return oil (water) function. (Optional)
3. Return oil (water) temperature display.
4. Automatic exhaust function at startup.
5. Heating power switching function.
6. Instant cooling shutdown function. (Optional)
7. Isolated electrical control box, extending the service life of electrical appliances.
8. RS485 communication function, realizing automatic management. (Optional)
9. Hot oil (water) BY-PASS pressure relief circuit.
10. Multi point temperature control unit can be customized.
11. The horsepower and heating power of the oil (water) pump can be customized.
12. The electrical appliance adopts OMRON.FUJI.TE.LG.MOELLER.ABB.
13. Temperature control range: oil inlet temperature 200 ℃, 250 ℃, 350 ℃; Inlet water temperature: 120 ℃, 180 ℃.
14. Stainless steel integrated pipeline to reduce pipe resistance and rust
15. Control method: Adopt imported microcomputer or (optional) PLC control.
16. Perfect safety protection, fault display, repair and maintenance without professional personnel.
17. Special specifications can be customized.
Technical parameters of Daheda DHTGO series oil type roller heater, roller temperature controller, and roller mold temperature controller
机型/单位 Model / Units |
DHTGO-9 |
DHTGO-12 |
DHTGO-18 |
DHTGO-24 | |
温控范围 (℃) Temperature range |
30-200℃ | ||||
温控精度(℃)
Accuracty of temp.control |
±1℃ | ||||
电源 (V)Power supply |
AC220V/3φ380V50HZ/60HZ | ||||
传 热 媒 体 Medium |
油OIL | ||||
冷却方式 Cooling method |
间接冷却(板式热交换器) INDIRECT COOLING | ||||
冷却能量(Kcal/H) Cooling capacity |
8000-9500 | ||||
加热能量(KW)Heating capacity |
9 |
12 |
18 |
24 | |
泵浦马力(KW/HP)Pump horsepower |
0.75/1 |
0.75/1 |
1.5 /2 |
1.5 /2 |
2.2/3 |
最大泵流量/ 压力(L/MIN/ KG/CM2)
Pumpmax.flow pressure(50HZ/60HZ) |
160L/min
2.6kg/c㎡ |
160L/min
2.6kg/c㎡ |
220L/min
2.6kg/c㎡ |
220L/min
2.6kg/c㎡ |
300L/min
3.0kg/c㎡ |
补充油箱容量(L )Oiltank capacity |
20 |
30 | |||
冷却入水压力(KG/CM2)
Cooling into the water pressure |
2.6 | ||||
最大电力消耗 (KW)Maximumpowerconsumption |
9.5 |
12.75 |
13.5 |
19.5 |
26.25 |
冷却水配管(INCH)
Cooling water pipe |
1/2’’PT | ||||
循环热媒体配管 (INCH)
Loop piping hot media |
2进2出至3/4’’PT或1进1出至1’’PT | ||||
外型尺寸(CM)Dimensions L*W*H |
76*30*65 |
64*30*65 |
76*30*65 |
76*30*65 |
95*46*93 |
净重(KG)Weight |
75 |
75 |
75 |
75 |
85 |