How to maintain Dongguan mold temperature machine
"After purchasing a new Dongguan mold warmer, please check whether the cooling water is flowing before use to prevent damage to the Dongguan mold warmer due to insufficient cooling water.". We need to keep the working environment of Dongguan mold warmer clean and avoid dust, which can greatly extend the service life of the electrical components of Dongguan mold warmer.
For the new Dongguan mold heater, we need to take different maintenance measures based on the heat transfer media used. If the medium is water, we should keep the water source clean, so that it is not easy to scale, and it can also prevent pipeline blockage. If the medium is oil, we need to regularly replace it according to the operating temperature. If the temperature is above 200 ℃, we need to regularly replace it once a month or two, while if the temperature is below 200 ℃, we can replace it once a quarter or so, which effectively avoids the problem of temperature rise.
In terms of pipelines, we need to determine whether there is any blockage in the pipeline based on the relationship between pump and pressure. If the pressure is too low, we can take out the heating pipe and clean it with tools, especially the filter screen at the system inlet. It is best to clean it once a month.
Regularly inspect the water pump and oil pump of Dongguan mold temperature machine for water and oil leakage, and check whether the shaft seal is worn or aged. If necessary, the pump shaft seal can also be replaced regularly.
5. For electrical components, we can timely replace and regularly test them according to their service life to ensure safety.
Daheda Industrial Temperature Control Equipment Series: Water type mold temperature Oil type mold temperature machine 350 ℃ Oil type mold temperature machine (die casting mold temperature machine) High temperature 180 ℃ Water type mold temperature machine Dual machine integrated mold temperature machine Magnesium alloy die casting mold temperature machine Dongguan mold temperature machine
Special roller mold temperature machine, roller heater, roller temperature controller, and other products.