A. After purchasing a new water type mold temperature oil type mold temperature machine, please check whether the cooling water is flowing before use to prevent damage to the water type mold temperature oil type mold temperature machine due to insufficient cooling water. We need to keep the working environment of the water type mold temperature oil type mold temperature machine clean and avoid dust, which can greatly extend the service life of the electrical components of the water type mold temperature oil type mold temperature machine.
B. For the new oil type mold heater and water type mold heater, we need to take different maintenance measures based on the heat transfer medium used. If the medium is used as water, we should keep the water source clean, so that it is not easy to scale and can also prevent pipeline blockage. For media based oils, we need to regularly replace them according to the operating temperature. For those above 200 ℃, we need to regularly replace them once a month or two, while for those below 200 ℃, we can replace them once a quarter or so, which effectively avoids the problem of temperature rise.
In terms of pipelines, we need to determine whether there is any blockage in the pipeline based on the relationship between pump and pressure. If the pressure is too low, we can take out the heating pipe and clean it with tools, especially the filter screen at the system inlet, which is best cleaned once a month.
D. Regularly inspect the oil mold temperature machine, water mold temperature machine, oil pump, and water pump for oil and water leakage. If necessary, the pump shaft seal can also be replaced regularly.
For electrical components, we can timely replace and regularly test them according to their service life to ensure safety; Generally, if the temperature is above 200 ℃, it takes about 5 months to replace it.
Oil type mold temperature machine Water type mold temperature machine consultation hotline: 13602318867 0769-83660871 Email: xiongdajun@163.com